Free inspection · Insurance billed directly
Mold Remediation & Removal
Sealed containment, removal of what's colonized, and a fix for the moisture behind it.
Serving Orange, Rockland & Westchester counties in NY and Bergen, Passaic, Essex & Hudson counties in North Jersey.
At a glance
Mold grows where there's moisture, so the water source is where we start. We contain the work area so spores don't spread, physically remove what's colonized instead of painting over it, clean the air with HEPA filtration, and fix the water that fed it. On the health questions, we'll tell you what the EPA guidance says.
Content reviewed July 2026.
The inspection is free, and you get a written scope before any work starts. If the job is smaller than you expected, we'll tell you that.
The work
What's included
Mold remediation built on IICRC S520 practice: sealed containment, HEPA-filtered negative air, physical removal of affected materials, and the moisture fix that keeps mold from coming back.
- Sealed containment with HEPA-filtered negative air keeps spores in the work zone
- Colonized porous materials physically removed, not sprayed and encapsulated
- HEPA vacuuming and damp-wiping of every surface in the work area
- The moisture source found and fixed, because remediation without that is temporary
- Answers to your health questions that line up with EPA guidance
- Independent third-party clearance testing available on request
- Free inspection with a written scope before any work begins
Process
How the job goes.
- 01
Inspect & find the moisture
Every mold job starts as a water investigation. Moisture meters and thermal imaging trace where the water comes from: a leak, condensation, ground moisture, or a bath fan venting into the attic. Remove the mold without stopping the water and it grows back.
- 02
Contain the work area
Plastic containment seals the affected area, and negative air machines with HEPA filtration keep airflow moving into the zone rather than out of it. Without containment, the work itself spreads spores into rooms that were clean.
- 03
Remove what's colonized
Porous materials with growth (drywall, insulation, carpet) get bagged inside containment and removed; they can't be reliably cleaned. Framing and other structural wood gets HEPA-vacuumed, cleaned, and treated as its condition calls for.
- 04
Clean the air & surfaces
HEPA air scrubbers run throughout, then every surface in the containment gets HEPA-vacuumed and damp-wiped. The S520 standard for finishing is a work area that is visibly clean, dust-free, and odor-free, and that's what we clean to.
- 05
Fix the moisture source
This is the repair that ends the problem: the leak fixed, the bath fan vented outside, the grading or gutter issue named in writing. We handle what's in our scope and tell you who to call for what isn't.
- 06
Verify
Final walkthrough against the written scope. If you want lab numbers behind the visual standard, we arrange third-party clearance testing, and that lab reports to you rather than to us.
Insurance
We work with your insurance, and we bill them directly
- 01
Call us
We answer, ask what happened, and get a crew moving. Same-day emergency response on active water.
- 02
We document everything
We take moisture readings and photos and write up a scope of work before drying starts, so your adjuster has the file from day one.
- 03
We bill your insurer directly
We work directly with your insurance company on covered water and mold claims, so you're not fronting the full cost and chasing reimbursement.
Your deductible is still yours to cover, and we'll tell you that number before any work starts rather than after. You also don't need a claim to hire us. Plenty of our jobs are paid directly by the homeowner, and after the free inspection we'll say which way makes more sense for the damage you have.
Common problems
What we get called about most.
Black spots on the bathroom ceiling that keep coming back
Almost always condensation from a fan that's undersized, unused, or venting into the attic. We remediate the growth, but the ventilation is the fix that keeps it gone, so we'll tell you what's wrong with yours and what it takes to correct it.
A musty basement or crawl space smell
That odor usually means microbial growth somewhere you can't see yet. We find the moisture feeding it, whether that's ground vapor, seepage, or condensation on cold surfaces, and we scope the remediation to what's colonized rather than to the whole basement.
Mold found during a home sale inspection
One line in an inspection report can hold up a closing, usually with about two weeks to deal with it. We inspect quickly, scope only what's there, do the work under containment, and provide documentation, plus third-party clearance testing if the buyer's side wants numbers.
The previous 'mold guy' sprayed and painted over it
Encapsulant sprayed over live growth on a wet wall doesn't hold, because the water is still there. We open it up, remove what should have come out the first time, dry the area and fix the moisture source, and document the work this time around.
Who's showing up
Local and independent since 2019.
The person on the phone is the one planning your job, and the scope and moisture readings come from the crew that does the work.
- IICRC Certified
- Licensed
- Bonded
- Insured
- Eco-Conscious Products
Related services
Mold work, broken out by problem.
Mold by town
Mold Remediation across 25NY & NJ towns.
Every town has its own page, with the kind of homes we work on there and how long the drive takes us.
FAQ
Questions we get most.
Does homeowners insurance cover water damage?
Usually, yes, as long as the damage was sudden and accidental: a burst pipe, a failed water heater, a washing machine hose that split. Policies generally exclude gradual damage, like a slow leak that ran for months or deferred maintenance, and they exclude flooding from outside, which needs a separate flood policy. When we inspect, we document the cause of loss carefully, because that's the first thing the adjuster looks at.
Is mold in my house dangerous?
Mold can irritate eyes, nose, and throat, trigger allergic reactions like sneezing and skin rash, and aggravate asthma in people who have it. Sensitivity varies a lot from person to person. That's the EPA's position and ours. It's worth taking seriously, but it isn't the health catastrophe some sites describe. Mold is a moisture problem in the house, and it's a fixable one.
What's the difference between mold removal and mold remediation?
"Mold removal" is a misleading term. Spores exist naturally everywhere, indoors and out, so no company can remove all mold from a house. Remediation is the accurate word: contain the affected area, take out materials too far gone, clean what can be cleaned, filter the air, and fix the moisture problem that caused the growth. Skip that last step and the mold comes back no matter how thorough the cleanup was.
What is containment and why does it matter?
Containment keeps a mold problem in one room. Disturbing moldy material sends spores airborne, so before any demolition we seal the work area with plastic sheeting, cover HVAC vents, and run HEPA-filtered machines that hold the space under negative pressure, meaning air flows in and not out. Without it, cutting out moldy drywall spreads spores through the rest of the house.
How long does mold remediation take?
One to two days for a small, contained area like a patch behind a vanity or a closet wall. Multiple rooms, flooring removal, or a wet structure that has to be dried first runs several days to a week or more. Repairing the source and rebuilding usually add more time than the remediation itself. After the inspection you get a schedule with each of those steps laid out.
Can I clean up mold myself?
Yes, if it's small. The EPA's rule of thumb is about 10 square feet, roughly a 3-by-3 patch. Under that, a careful homeowner can handle it with gloves, an N95 mask, and detergent, as long as the moisture source gets fixed too. Call a professional when it's bigger, inside walls or the HVAC system, involved sewage, or when someone in the house has asthma or mold sensitivity. We'll tell you at the inspection if it's a DIY-sized job.
Will the mold come back after remediation?
Only if the moisture comes back. Mold needs water, so fixing the leak, the drainage, the ventilation, or the humidity is what keeps it gone. That's why our remediation includes finding the moisture source and not just cleaning the visible growth. Cleaning without the repair means doing the job over again. Afterward, keep indoor humidity down, run the bath fans, and call early about new leaks.
Our work
Free inspection
Start with a free inspection and a written scope.
Call or send the form. We come out, look at what you have, and put the scope in writing so you know what the work involves. If it can wait, we'll say so.
Office hours: Mon–Fri 8am–6pm · Sun 8am–6pm · Closed Saturdays.