Skip to content
Mon–Fri 8am–6pm · Sun 8am–6pm · Closed Saturdays4.9 · 273+
(845) 262-6530

Westchester County, NY · ~50 min away

Mold Remediation in White Plains, NY

The inspection is free and the scope comes in writing. If the problem turns out smaller than you feared, that's what we'll tell you. White Plains is about 50 minutes out for us.

Pre-war co-ops and Tudors mean plaster walls, steam heat, and original hardwood, all worth saving and slow to dry. In managed buildings we work to the board's rules and document for both the unit owner's and the building's insurance.

Free inspection with a written scope before any work begins. Covered claims are billed directly to your insurance carrier.

Process

How the job goes.

Containment goes up first, the affected material comes out second, and the moisture source gets fixed before we finish. Here's the short version; the service page explains each step and why the order matters.

  1. Inspect & find the moisture
  2. Contain the work area
  3. Remove what's colonized
  4. Clean the air & surfaces
  5. Fix the moisture source
  6. Verify

The full mold remediation process, step by step →

Local knowledge

What we see in White Plains

The housing stock, the terrain, and the drainage in White Plains all change how we plan a job. Here's what we run into:

Getting to you

Roughly 50 minutes via I-287. For co-ops and condos we bring the COI, book the freight elevator, and protect common areas. The logistics are half the job in this market.

Water & drainage

Downtown sits in a natural low along the river valley with a lot of pavement above it, so cloudburst runoff arrives from several directions at once. The hillier single-family neighborhoods shed the water and the low blocks receive it.

On the ground

When Ida's remnants hit Westchester in September 2021, flooding shut the Bronx River Parkway between White Plains and Yonkers and put water in low-lying basements across the area. The Bronx River valley along the city's west side still sets the flood terms here.

Common problems

The problems we're usually called about.

Black spots on the bathroom ceiling that keep coming back

Almost always condensation from a fan that's undersized, unused, or venting into the attic. We remediate the growth, but the ventilation is the fix that keeps it gone, so we'll tell you what's wrong with yours and what it takes to correct it.

A musty basement or crawl space smell

That odor usually means microbial growth somewhere you can't see yet. We find the moisture feeding it, whether that's ground vapor, seepage, or condensation on cold surfaces, and we scope the remediation to what's colonized rather than to the whole basement.

Mold found during a home sale inspection

One line in an inspection report can hold up a closing, usually with about two weeks to deal with it. We inspect quickly, scope only what's there, do the work under containment, and provide documentation, plus third-party clearance testing if the buyer's side wants numbers.

The previous 'mold guy' sprayed and painted over it

Encapsulant sprayed over live growth on a wet wall doesn't hold, because the water is still there. We open it up, remove what should have come out the first time, dry the area and fix the moisture source, and document the work this time around.

Insurance

We work with your insurance, and we bill them directly

  1. 01

    Call us

    We answer, ask what happened, and get a crew moving. Same-day emergency response on active water.

  2. 02

    We document everything

    We take moisture readings and photos and write up a scope of work before drying starts, so your adjuster has the file from day one.

  3. 03

    We bill your insurer directly

    We work directly with your insurance company on covered water and mold claims, so you're not fronting the full cost and chasing reimbursement.

Your deductible is still yours to cover, and we'll tell you that number before any work starts rather than after. You also don't need a claim to hire us. Plenty of our jobs are paid directly by the homeowner, and after the free inspection we'll say which way makes more sense for the damage you have.

Who's showing up

Local and independent since 2019.

The person on the phone is the person planning the job. We're in White Plains every week.

  • IICRC Certified
  • Licensed
  • Bonded
  • Insured
  • Eco-Conscious Products

FAQ

Questions we get most.

Is mold in my house dangerous?

Mold can irritate eyes, nose, and throat, trigger allergic reactions like sneezing and skin rash, and aggravate asthma in people who have it. Sensitivity varies a lot from person to person. That's the EPA's position and ours. It's worth taking seriously, but it isn't the health catastrophe some sites describe. Mold is a moisture problem in the house, and it's a fixable one.

What's the difference between mold removal and mold remediation?

"Mold removal" is a misleading term. Spores exist naturally everywhere, indoors and out, so no company can remove all mold from a house. Remediation is the accurate word: contain the affected area, take out materials too far gone, clean what can be cleaned, filter the air, and fix the moisture problem that caused the growth. Skip that last step and the mold comes back no matter how thorough the cleanup was.

What is containment and why does it matter?

Containment keeps a mold problem in one room. Disturbing moldy material sends spores airborne, so before any demolition we seal the work area with plastic sheeting, cover HVAC vents, and run HEPA-filtered machines that hold the space under negative pressure, meaning air flows in and not out. Without it, cutting out moldy drywall spreads spores through the rest of the house.

How long does mold remediation take?

One to two days for a small, contained area like a patch behind a vanity or a closet wall. Multiple rooms, flooring removal, or a wet structure that has to be dried first runs several days to a week or more. Repairing the source and rebuilding usually add more time than the remediation itself. After the inspection you get a schedule with each of those steps laid out.

Will the mold come back after remediation?

Only if the moisture comes back. Mold needs water, so fixing the leak, the drainage, the ventilation, or the humidity is what keeps it gone. That's why our remediation includes finding the moisture source and not just cleaning the visible growth. Cleaning without the repair means doing the job over again. Afterward, keep indoor humidity down, run the bath fans, and call early about new leaks.

Service area

White Plains, NYWestchester County.

We're about 50 minutes out, six days a week. The homes run to pre-war co-ops and Tudors, mid-century capes and colonials, and downtown high-rises. We cover every block, including downtown White Plains, Fisher Hill, Battle Hill. White Plains is known for being Westchester's county seat and corporate center, the Bronx River Parkway reservation, and its walkable downtown.

Free inspection

Start with a free inspection in White Plains.

Call or send the form. We look, we measure, and you get a written scope and a straight answer. Sometimes that answer is that the work can wait.

Office hours: Mon–Fri 8am–6pm · Sun 8am–6pm · Closed Saturdays.

Free estimate

Send the details — we'll take a look.

Faster by phone? Call (845) 262-6530.